Liquid Rubber EPDM

Liquid Rubber EPDM can be applied directly on many types of surfaces with solid, stable, non-porous and uniform surfaces such as flat roofs. For most surfaces, primers are not necessary. As an example, some types of surfaces that can be coated with Liquid Rubber EPDM are as below ;

- EPDM Rubber Sheets / Roofs
- Galvanize Steel Panels / Roofs
- Non-Polished Aluminum Sheets / Roofs
- Steel Plates ( Painted, Unfinished, Light Corrosion )
- Fiberglass Panels / Roofs
- Wood & Plywood ( treaded with oil based sealer )
- Non-porous / steel troweled concrete surfaces / masonry

Though, Liquid Rubber EPDM can be applied using airless spray equipment, this document deals with manual applications – recommended for surfaces of less than 20,000 sq.ft.

Besides flat and sloped surfaces Liquid Rubber EPDM has enough consistency so that it can also be applied on vertical walls / surfaces, to about 20 mils dft. or thinner per coat. The prime considerations when applying on sloping / vertical surfaces should be safety and falling hazards.

For further details please visit: http://www.buyliquidroof.com/applications.html