Roof repair Often made after the damage has been done; however, if you keep up on routine roofs maintenance you can avoid Roof Leaks and unnecessary damage altogether.65% of roofs replacements are performed because of roof leaks. Roof leaks repair can be easily done by EPDM Rubber. Break the roofs repair cycle with Elastomeric Roof Coatings. Liquid Roof and Liquid Rubber are liquid EPDM Rubber products which form a membrane of 100% pure EPDM rubber when cured. this coating Rubber is specially Formulated for roof repair and leak repair.
The homeowners take the roofing problems seriously only when they view water leakage or brown discolor on the ceiling or if there is a crack in walls or peeling wallpapers. This proof may be seen only after few days of leaking inside your house. Many problems are arisen as fungus, dry rot, insulation damages, and many others. Thus you need a major repairing or replacement of the roof. Therefore to protect your roof from these problems, you are supposed to get the roof inspected once or twice every year. If you get time to time inspection of your roof, you will never have to pay extra dollars.
Over the past 45 years, EPDM single-ply roof systems have grown consid¬erably in market share compared with their modified bitumen and built-up competition. As a result, there are many aging EPDM roofs, and consultants will be faced with the task of providing cost-effective, durable solutions to keep the roofs in proper work¬ing order without tearing them off entirely.
The common products include Elastomeric coatings that are Liquid Roof and Liquid Rubber. These are the most effective products by way of cost and repair. Liquid Roof Coatings are Specially Designed for RVs. Liquid roof coatings are aftermarket products designed to extend roof life. Liquid Roof seals roof leaks, or merely provide a heat reflective or aesthetic roof coatings function over existing roof surfaces. Liquid Roof forms a 100% chemically-cured seamless White membrane every bit as solid and attractive as factory-installed sheet rubber. Liquid Roof's simple one-coat application by brush or roller saves you time and money, sealing and protecting your RV from water damage.
Liquid Roof
Liquid Roof
Showing posts with label Metal Roof. Show all posts
Showing posts with label Metal Roof. Show all posts
Saturday, March 19, 2011
Tuesday, March 1, 2011
Maintenance of Your Metal Roof
Metal roofs are a lot less works than other kinds of roofs when it comes to maintenance, and can provide your home with protection for generations if taken care of properly. All metal roofs will come with a protective coating; however, this coating may not last very long. Therefore, the first and best step you will ever make in protective maintenance of your metal roof is to cover it with a new, reliable protective coating. Several different choices of metal roof coating are available and they include polymeric and asphalt coatings.
Most metal roofs are constructed using long metal sheets or with metal tiles. It doesn’t matter what kind of material is used on your roof, there is going to be a danger that, at every intersection where the tiles or sheets are overlapped, leaks can occur. Metal roofs will usually wear fastest around the ridge and valley of the roof, as well as around the fascia board. This can be avoided with proper maintenance.
What’s Necessary
The majority of metal roofs are protected by being either aluminized or galvanized, or else they are painted with galvalume protective coating. Each of these materials is pretty much maintenance free, although regular cleaning is a necessity. However, it is better to add your own, high-performance protective roof coating if you want true piece of mind.
Out of all the different protective metal roof paints available, perhaps one of the best ones is Polyyinylidene Fluoride or PVDF. PVDF can increase the strength of the metal on your roof, it is resistant to chemicals and corrosive substances, it offers the highest weather resistance, protection from UV rays and it is even resistant to fungi. When you apply a PVDF treatment to your metal roof, you should only need to check it every 9 or 10 years to see if a new coat is required, while other metal roof finishes such as plastisol, acrylic and urethane will need checking after just 3 to 5 years.
Metal Roof Sealants
There are many great and innovative new solutions for metal roof sealing. Traditionally used ashphaultic sealants have been outperformed when compared to newer products such as the micro sealant called EternaBond. This new product comes as a large roll of sticky tape and can be applied easily by anyone, even somebody with no experience. The EternaBond tape offers great resistance to temperature extremes and inclement weather, and it’s a good fix for roof leaks too. However, it’s worthwhile to know that while a sealant such as this is great for patch up jobs, employing preventative measures such as a PVDF coating means that it’s unlikely you will ever need to use a sealant.
Most metal roofs are constructed using long metal sheets or with metal tiles. It doesn’t matter what kind of material is used on your roof, there is going to be a danger that, at every intersection where the tiles or sheets are overlapped, leaks can occur. Metal roofs will usually wear fastest around the ridge and valley of the roof, as well as around the fascia board. This can be avoided with proper maintenance.
What’s Necessary
The majority of metal roofs are protected by being either aluminized or galvanized, or else they are painted with galvalume protective coating. Each of these materials is pretty much maintenance free, although regular cleaning is a necessity. However, it is better to add your own, high-performance protective roof coating if you want true piece of mind.
Out of all the different protective metal roof paints available, perhaps one of the best ones is Polyyinylidene Fluoride or PVDF. PVDF can increase the strength of the metal on your roof, it is resistant to chemicals and corrosive substances, it offers the highest weather resistance, protection from UV rays and it is even resistant to fungi. When you apply a PVDF treatment to your metal roof, you should only need to check it every 9 or 10 years to see if a new coat is required, while other metal roof finishes such as plastisol, acrylic and urethane will need checking after just 3 to 5 years.
Metal Roof Sealants
There are many great and innovative new solutions for metal roof sealing. Traditionally used ashphaultic sealants have been outperformed when compared to newer products such as the micro sealant called EternaBond. This new product comes as a large roll of sticky tape and can be applied easily by anyone, even somebody with no experience. The EternaBond tape offers great resistance to temperature extremes and inclement weather, and it’s a good fix for roof leaks too. However, it’s worthwhile to know that while a sealant such as this is great for patch up jobs, employing preventative measures such as a PVDF coating means that it’s unlikely you will ever need to use a sealant.
Thursday, September 2, 2010
Things to know When Sealing metal Roof
RV Roof Repair comes in metal roof. So we are explaining some points about how to seal a metal roof and what are recommended maintenance measures for metal roofs.
Before undertaking any maintenance we recommend that you consult a roofing expert about all the safety precautions you should take before climbing onto the roof.
The following steps should be followed carefully when it comes to carrying out metal roof maintenance work:
1. Do not allow different kinds of metal to be touching one another. When different metals touch, chemical reactions can occur and cause the metal to corrode.
2. Be vigilant and make sure the paintwork is always touched up. This will help to prevent rust.
3. As soon as you spot a hole or an open seam, repair it immediately, do not delay!
4. Smaller holes can be covered with either roofing cement, or else the EternaBond tape that was discussed previously. Large holes need to be patched and soldered into place with the same kind of metal as the roof is made from.
5. Any screws that you use must be of the same kind of metal as the roof.
6. When screwing plates or sheets into place, make sure you always use a washer, and install the screw into a raised area rather than low areas as this can lead to water pooling and eventual leaks.
7. Use only non-corrosive metal flux with steel roofs. For copper roofs, acid flux is best.
These are the tools necessary for carrying out metal roofing repairs:
• Galvanized metal
• Screws of the same type of metal as the roof
• Roof coating such as PVDF
• A putty knife
• Butyl tape or EternaBond tape
• Roofers caulk
• Wire brush
• Snips
Steps to take when patching a hole:
1. Firstly, clean the area around the hole thoroughly, washing away all dust.
2. Cut a good sized piece of galvanized metal that covers the hole easily. You should have a bearing of 2 or 3 inches over the edge of the hole.
3. Tape the galvanized metal sheet into place with the butyl tape.
4. Screw the sheet into the roof, spacing the screws out every 2-3 inches.
5. Seal the edges of the sheet and around the screws with caulk.
6. Finally, cover the new patch with PVDF roof coating.
Before undertaking any maintenance we recommend that you consult a roofing expert about all the safety precautions you should take before climbing onto the roof.
The following steps should be followed carefully when it comes to carrying out metal roof maintenance work:
1. Do not allow different kinds of metal to be touching one another. When different metals touch, chemical reactions can occur and cause the metal to corrode.
2. Be vigilant and make sure the paintwork is always touched up. This will help to prevent rust.
3. As soon as you spot a hole or an open seam, repair it immediately, do not delay!
4. Smaller holes can be covered with either roofing cement, or else the EternaBond tape that was discussed previously. Large holes need to be patched and soldered into place with the same kind of metal as the roof is made from.
5. Any screws that you use must be of the same kind of metal as the roof.
6. When screwing plates or sheets into place, make sure you always use a washer, and install the screw into a raised area rather than low areas as this can lead to water pooling and eventual leaks.
7. Use only non-corrosive metal flux with steel roofs. For copper roofs, acid flux is best.
These are the tools necessary for carrying out metal roofing repairs:
• Galvanized metal
• Screws of the same type of metal as the roof
• Roof coating such as PVDF
• A putty knife
• Butyl tape or EternaBond tape
• Roofers caulk
• Wire brush
• Snips
Steps to take when patching a hole:
1. Firstly, clean the area around the hole thoroughly, washing away all dust.
2. Cut a good sized piece of galvanized metal that covers the hole easily. You should have a bearing of 2 or 3 inches over the edge of the hole.
3. Tape the galvanized metal sheet into place with the butyl tape.
4. Screw the sheet into the roof, spacing the screws out every 2-3 inches.
5. Seal the edges of the sheet and around the screws with caulk.
6. Finally, cover the new patch with PVDF roof coating.
Subscribe to:
Posts (Atom)