Flat roof leaks repair with EPDM

Roof Leaks Repair with EPDM Coatings

Roof leaks repair with EPDM coatings is often recommended by professionals for many reasons. Here are the reasons to consider this type of liquid synthetic rubber for all of your roofing repairs.

Cost Savings

There are short-term and long-term cost savings. Repairing a leak is always less expensive than replacing the roofing material but most repairs are short-lived. The leak has to be repaired again and again.

Leaky spots typically occur on flat roofs in areas where rainwater pools. Those spots are not going to go away easily. To completely get rid of them could require a complete renovation of the building.

The best coating can last three times as long as other reparative materials. It lasts longer than acrylics and urethanes. Since you don’t have to make the repairs again and again, there is a significant long-term cost savings.

Ease of Use

Flat roof leaks repair with EPDM coatings is also recommended because of how easy it is to use. You can do the work yourself. You can hire a contractor or you can have your existing maintenance crew do the work.

Complete instructions concerning temperature, application, coats, cure time and other important factors are included with the products. Basic application instructions include cleaning the surface and then applying the material with a rubber squeegee and a short-nap roller brush. You can use a standard paint brush for hard to reach areas.

Keep your roof from leaking with Liquid EPDM

A roof leak can not only be troublesome, it can be costly. Both the damage done by the leaking water itself and the cost of repairing the roof can quickly add up. Rather than spend a lot of time, money and effort hiring professionals to repair your roof why not do it yourself with the only product that’s easy to use, cost efficient and extremely durable?

There’s no reason to endure lengthy and costly repairs when you can use Liquid EPDM to cover your roof and prevent leaking, cracking and other damage from the elements. Constructed using the same chemical composition as traditional sheet EPDM roofing, liquid EPDM gives you the added bonus of flexibility and ease of use so you can handle those repairs yourself.

While traditional sheet EPDM can trap air underneath, leading to cracking and breaking later on, liquid EPDM goes on in one smooth coat and is designed to expel excess air during the curing process so that you are left with a strong, water and airtight seal. And because liquid EPDM will expand and contract with the roof’s surface when the temperature changes, there is less likelihood of weather related damage resulting in a roof leaks.

How to Inspect Your Roof

The best preventative maintenance for your roof is to perform visual inspections of the roof surface at least twice a year (Spring/Fall), and after any major storm (wind, rain, hail, snow) or construction project. This will help you to identify any potential problems that may come up. It is important to remember that traffic on your roof should be kept to a minimum as shingles are brittle, especially in extreme hot or cold temperatures. Instead of walking the roof, use a pair of binoculars to get a closer view of the roof surface. Here is what you should be checking:

• Shingle Surface: Inspect the general surface of the roof. First, look for signs that the shingles may be lifting, loose or even missing. Check to make sure that the roof surface is free of all debris (leaves, garbage, twigs etc.). It is important that you do not power wash your roof! This can cause significant damage. Use a leaf blower or garden hose to remove debris. Look for mold, moss or algae – these occur more commonly in damp climates and often accumulate along the ridge or near the eaves or shaded areas of the roof. Look for exposed nails, hail marks, or missing granules (bald spots).

• Flashings: Inspect all flashings around chimneys, vents, plumbing stacks, skylights, walls and valleys looking for rust, cracks, or other openings where water may enter. Look also for flashings that may have lifted from the surface of the roof. If you can see deterioration, call us right away to provide a more thorough inspection or repair.

• Surrounding Vegetation: Look for areas where vegetation has grown over or is touching the roof surface. Trim back any overhanging branches. Shaded areas encourage moss and fungus growth and can encourage ice dams and run-off problems.

• Building Exterior: Check your home for signs of shifting or settlement. Cracks in the structure (inside or out) are signs that there could also be cracks in the roof. Look to make sure that overhangs, soffit, fascia and downspouts are in good condition. Check your eaves-trough to make sure they are unclogged and free of debris.

For furhter details on Roofing Problems and its solutions:
Liquid Roof
Liquid Roof the Solution for roofing problems.
EPDM
Roof Coatings

Application Tips for Liquid Roof

The true Liquid EPDM rubber available in the market is Liquid Roof. The advantages that this liquid rubber coating offers are countless. It is waterproof, has high compatibility with almost all types of surfaces, very flexible and elastic and can withstand a large temperature range from -62 degrees F to 300 degrees F without cracking.

There are some tips which must be kept in mind before applying liquid rubber on your roof. Be aware that it is a 3 to 6 hrs process, excluding the surface preparation time. Once the liquid EPDM Rubber is applied, it takes around 16 to 20 hours to dry up. Therefore proper management of time is necessary. Careful planning regarding weather conditions should be done as well, i.e. one should plan to work on days when the rain is not expected because although Liquid Roof will immediately waterproof, even when wet, avoid heavy rain until it is completely dry to the touch which means 16 - 20 hours after application. To be on the safe side, one can say that a full cure will be achieved in 4 - 10 days after application, in consistent 70 deg. F.

The extensive and useful spray and application characteristics of liquid roof make it very unique and different from the other coatings. Surface preparation before application of liquid roof is a compulsory step because this is done to ensure that there are no holes, gaps, seams, and tears on the roof and if there, they should be repaired before application. Any potential weak areas should be reinforced and asphalts or silicone type of caulking on the roof / surface should be removed as well. The roof should then be thoroughly dried.

Properly catalyzing the liquid rubber with a pre-measured catalyst according to instructions is very important. Always try to apply a single coat of the product for best results Liquid rubber penetrates through small surfaces and pores despite the fact that it has high consistency. Use a squeegee or a roller for flat surfaces. Spread with a squeegee and then level it with a short nap roller. The liquid roof can easily be applied to areas which are small and difficult to access e.g. chimneys, roof flashings, pipes, fish ponds etc with a paint brush. Application of a 20 mil layer of the liquid roof is recommended for efficient results.

For more details and tips on liquid roof application, check out:

EPDM Coatings

Liquid Rubber